Controlling the heat input and using a high energy density beam of several tens of µm enables dross-free, sharp cutting.(Note 1)
(Note 1) Dross: Molten material that becomes attached during cutting
Titanium
Single-mode fiber laser
| Output | 200 W |
|---|---|
| Speed | 300 mm/sec |
| Material | Pure titanium, t0.3 mm |
Ceramics
Single-mode fiber laser
| Output | 450 W |
|---|---|
| Speed | 200 mm/sec |
| Material | Alumina ceramic t0.5 mm |
