 |
ISDN???M?米兰体育中国官方网站??ʒm?ɂ?鑊??F?ƒ??M????PPP?iCHAP?j?F???g?p??????ł??B????????_?C?????A?b?v?ڑ??i?Q????????ڑ??j?ɑΉ????Ă??܂??B
???????ł́A米兰体育中国官方网站?ł̐ݒ????????܂??BINFONET-RX10H?ł米兰体育中国官方网站??͂?????B
|
INFONET-RX20 Remote Router B V01.03 1998.04.15
WAN topology ( 6) 1998/07/01 14:16:07 ( 0 00:02:00) Normal Mode
1. configuration display
2. configuration set (normal)
3. configuration set (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
Select the number. : 6?@?@?@??Super Mode?Ɉړ????܂?
New password: ?@?@?@???K???p?X???[?h?????Ă???????
Retype New password:
New password is accepted.
INFONET-RX20 Remote Router B V01.03 1998.04.15
WAN topology ( 6) 1998/07/01 14:16:16 ( 0 00:02:10) Super Mode
1. configuration display
2. configuration set (normal)
3. configuration set (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
Select the number. : 2
*** Selecting PORT way ***
1 HSD, HSD
* 2 HSD, ISDN
3 FR, ISDN
Select the number. [2]:
?F
?F?ȗ?
?F
*** Selecting WAN topology ***
<"L:" is load split, "B:" is backup, "L+B:" is load split and backup
1 HSD
2 HSD ( B:米兰体育中国官方网站1)
3 HSD (L+B:米兰体育中国官方网站1)
4 HSD (L+B:米兰体育中国官方网站1,2)
5 HSD ( B:米兰体育中国官方网站1,2)
* 6 米兰体育中国官方网站1
7 米兰体育中国官方网站1 (L :米兰体育中国官方网站2)
8 HSD, 米兰体育中国官方网站1
9 HSD, 米兰体育中国官方网站1 (L :米兰体育中国官方网站2)
10 米兰体育中国官方网站1, 米兰体育中国官方网站2
11 HSD ( B:米兰体育中国官方网站1),米兰体育中国官方网站2
12 HSD (L+B:米兰体育中国官方网站1),米兰体育中国官方网站2
13 HSD, 米兰体育中国官方网站1, 米兰体育中国官方网站2
Select the number. [6]: 10?@?@?@??ISDN???(2B)???g?p???܂?
*** Set multi target configuration ***
<multi target configuration parameter(s)
multi target: not use
Do you change (y/n)? [n]: y
multi target (1:use 2:not use) [2]: 1?@?????????_?Ƃ̐ڑ????s???܂?
multi target parameter(s) are set to the following values.
<multi target configuration parameter(s)
multi target: use
Set OK (y/n)? [y]:
*** Set ISDN remote address configuration ***
1. remote address data
2. remote address list
3. end
Select the number. [2]: 1
*** Set ISDN remote address data configuration ***
<ISDN remote address data configuration parameter(s)
receive address check mode : off
check skip length : 0
PPP authentication at incoming call : off
PPP authentication at outgoing call : off
PPP authentication accept : all
Do you change (y/n)? [n]: y
receive address check mode (1:on 2:off) [2]: 1
?????M?Ҕԍ??`?F?b?N???s??
check skip length [0]:
PPP authentication at incoming call (1:on 2:off) [2]: 1
?????M????PPP?F?????܂?
PPP authentication at outgoing call (1:on 2:off) [2]:
PPP authentication accept (1:chap 2:pap 3:all 4:off) [3]:
ISDN remote address data parameter(s) are set to the following values.
<ISDN remote address data configuration parameter(s)
receive address check mode : on
check skip length : 0
PPP authentication at incoming call : on
PPP authentication at outgoing call : off
PPP authentication accept : all
Set OK (y/n)? [y]:
*** Set ISDN remote address configuration ***
1. remote address data
2. remote address list
3. end
Select the number. [2]:
*** Set ISDN remote address list configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]: 3?@?@?@??target??ݒ肵?܂?
<Add ISDN remote address list
target [t-0000]: chiba
address []: 043123yyyy
subaddress []:
authen at incoming (1:chap 2:pap 3:off) [3]: 1
?????M????chap?F?????܂?
authen at outgoing (1:chap 2:pap 3:off) [3]:
password: pass2
my hostname []: tokyo
my password: pass1
ISDN remote address list:
no target
---+-----------------------------------------------------------------
1. chiba
address : 043123yyyy
subaddress :
authen at incoming : off
authen at outgoing : off
password : pass2
my host name : tokyo
my passwd : pass1
Add OK (y/n)? [y]:
*** Set ISDN remote address list configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]: 3
<Add ISDN remote address list
target [t-0001]: hiratsuka
address []: 046324zzzz
subaddress []:
authen at incoming (1:chap 2:pap 3:off) [3]: 1
authen at outgoing (1:chap 2:pap 3:off) [3]:
password: pass3
my hostname []: tokyo
my password: pass1
ISDN remote address list:
no target
---+-----------------------------------------------------------------
2. hiratsuka
address : 046324zzzz
subaddress :
authen at incoming : chap
authen at outgoing : off
password : pass3
my host name : tokyo
my passwd : pass1
Add OK (y/n)? [y]:
*** Set ISDN remote address list configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]:
*** Set ISDN remote address configuration ***
1. remote address data
2. remote address list
3. end
Select the number. [3]:
*** Main: Set 米兰体育中国官方网站1 configuration ***
<Main 米兰体育中国官方网站1 parameter(s)
local (ISDN address: subaddress: )
target index:
connection activate/deactivate: passive/passive
Do you change (y/n)? [n]: y
local ISDN address []: 031234xxxx?@?????ǂ̓d?b?ԍ???ݒ肵?܂?
subaddress []:
<Target index
1. chiba
2. hiratsuka
Select the number of target index []: 1?@???ڑ??????I?????܂?
<Select connection activate/deactivate mode
activate deactivate | activate deactivate
------------------------------+----------------------------
1. time time |4. manual manual
2. traffic traffic |5. passive passive
3. time+traffic time+traffic |
Select the number. [5]: 2?@?@?@???ڑ??_?@??ݒ肵?܂?
Main 米兰体育中国官方网站1 parameter(s) are set to the following values.
<Main 米兰体育中国官方网站1 parameter(s)
local (ISDN address: 031234xxxx subaddress: )
target index: chiba
connection activate/deactivate: traffic/traffic
Set OK (y/n)? [y]:
*** Main: Set 米兰体育中国官方网站2 configuration ***
<Main 米兰体育中国官方网站2 parameter(s)
local (ISDN address: subaddress: )
target index:
connection activate/deactivate: passive/passive
Do you change (y/n)? [n]: y
local ISDN address []: 031234xxxx
subaddress []:
<Target index
1. chiba
2. hiratsuka
Select the number of target index []: 2
<Select connection activate/deactivate mode
activate deactivate | activate deactivate
------------------------------+----------------------------
1. time time |4. manual manual
2. traffic traffic |5. passive passive
3. time+traffic time+traffic |
Select the number. [5]: 2
Main 米兰体育中国官方网站2 parameter(s) are set to the following values.
<Main 米兰体育中国官方网站2 parameter(s)
local (ISDN address: 031234xxxx subaddress: )
target index: hiratsuka
connection activate/deactivate: traffic/traffic
Set OK (y/n)? [y]:
*** Set basic configuration ***
<Basic configuration parameter(s)
IP routing : use
IP filtering : not use
IPX routing : not use
AppleTalk routing: not use
bridging : not use
SNMP : use
Do you change (y/n)? [n]:?F
*** Set IP address target configuration ***
<IP address target parameter(s)
IP address target table (max 20 entries)
no entry.
Do you change (y/n)? [n]: y
1. change 2. delete 3. add 4. end
Select the number. : 3?@??IP?A?h???X?ƃ^?[?Q?b?g??????v?????܂?
<Add IP address target
address []: 192.168.100.2
<Target index
1. chiba
2. hiratsuka
Select the number of target index []: 1
address target
192.168.100.2 chiba
Add OK (y/n)? [y]:
IP address target parameter(s) are set to the following values.
<IP address target parameter(s)
IP address target table (max 20 entries)
no address target
---+---------------+--------------------------------
1. 192.168.100.2 chiba
1. change 2. delete 3. add 4. end
Select the number. : 3
<Add IP address target
address []: 192.168.100.3
<Target index
1. chiba
2. hiratsuka
Select the number of target index []: 2
address target
192.168.100.3 hiratsuka
Add OK (y/n)? [y]:
IP address target parameter(s) are set to the following values.
<IP address target parameter(s)
IP address target table (max 20 entries)
no address target
---+---------------+--------------------------------
1. 192.168.100.2 chiba
2. 192.168.100.3 hiratsuka
1. change 2. delete 3. add 4. end
Select the number. : 4
Set OK (y/n)? [y]:
*** Set IP router configuration ***
<IP router configuration parameter(s)
routing interface list
broadcast or
IP address subnetmask remote address interface type
-------+----------------+----------------+----------------+--------------
LAN 192.52.150.1 255.255.255.0 192.52.150.255 broadcast
米兰体育中国官方网站1 0.0.0.0 255.255.255.255 0.0.0.0 point to point
米兰体育中国官方网站2 0.0.0.0 0.0.0.0 0.0.0.0 point to point
OSPF protocol: not use
Do you change (y/n)? [n]: y
routing interface (1.米兰体育中国官方网站1 2.米兰体育中国官方网站2) [1,2]: 1
LAN IP address [192.52.150.1]: 192.168.10.1
??LAN???̃A?h???X??ݒ肵?܂?
subnetmask [255.255.255.0]:
broadcast [192.168.10.255]:
米兰体育中国官方网站1 interface type (1:broadcast 2:point to point) [2]: 1
IP address []: 192.168.100.1
??WAN???̃A?h???X??ݒ肵?܂?
subnetmask [255.255.255.255]: 255.255.255.0
broadcast [192.168.100.255]:
OSPF protocol (1:use 2:not use) [2]:
IP router parameter(s) are set to the following values.
<IP router configuration parameter(s)
routing interface list
broadcast or
IP address subnetmask remote address interface type
-------+----------------+----------------+----------------+--------------
LAN 192.168.10.1 255.255.255.0 192.168.10.255 broadcast
米兰体育中国官方网站1 192.168.100.1 255.255.255.0 192.168.100.255 broadcast
OSPF protocol: not use
Set OK (y/n)? [y]:
*** Set RIP(IP) motion configuration ***
<RIP(IP) motion parameter(s)
mode : supplier
default metric: 16
Do you change (y/n)? [n]:
*** Set RIP(IP) interface configuration ***
<RIP(IP) interface parameter(s)
send recv metric pre- broad- interval ageout time
control control ference cast (sec) (sec)
------+-------+-------+------+-------+------+----------+------+----------
LAN RIP1 RIP1,2 0 0 - - - -
米兰体育中国官方网站1 RIP1 RIP1,2 0 0 off 30 off 180
米兰体育中国官方网站2 RIP1 RIP1,2 0 0 off 30 off 180
<RIP2 password
LAN : (not configured)
米兰体育中国官方网站1 : (not configured)
米兰体育中国官方网站2 : (not configured)
Do you change (y/n)? [n]: y
LAN RIP send control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [1]:
recv control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [3]:
password []:
metric [0]:
preference [0]:
米兰体育中国官方网站1 RIP send control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [1]: 4
??RIP???g?p???܂???
recv control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [3]: 4
??RIP???g?p???܂???
metric [0]:
preference [0]:
broadcast (1:on 2:off) [2]:
broadcast interval (sec) [30]:
RIP entry ageout (1:on 2:off) [2]:
ageout time (sec) [180]:
?F
?F?ȗ?
?F
RIP(IP) interface parameter(s) are set to the following values.
<RIP(IP) interface parameter(s)
send recv metric pre- broad- interval ageout time
control control ference cast (sec) (sec)
------+-------+-------+------+-------+------+----------+------+----------
LAN RIP1 RIP1,2 0 0 - - - -
米兰体育中国官方网站1 off off 0 0 off 30 off 180
米兰体育中国官方网站2 off off 0 0 off 30 off 180
<RIP2 password
LAN : (not configured)
米兰体育中国官方网站1 :
米兰体育中国官方网站2 :
Set OK (y/n)? [y]:
*** Set IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]: 4
<IP static routing table (max 32 entries)
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 0.0.0.0 ---.---.---.--- 16 50
米兰体育中国官方网站1
*** Set IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]: 2?@???K?v?łȂ??X?^?e?B?b?N???[?g???폜????
<Delete IP static routing data
Select the entry number. : 1
Selected IP static routing data:
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 0.0.0.0 ---.---.---.--- 16 50
米兰体育中国官方网站1
Delete OK (y/n)? [n]: y
*** Set IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]: 3?@???X?^?e?B?b?N???[?g??ݒ肷??
<Add IP static routing data
destination address [0.0.0.0]: 192.168.20.0
mask [255.255.255.0]:
gateway type(1:IP address 2:Interface 3:Target index) [1]:
gateway [0.0.0.0]: 192.168.100.2
metric [16]:
preference [50]:
IP static routing data:
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 192.168.20.0 255.255.255.0 16 50
192.168.100.2
Add OK (y/n)? [y]:
????L?Ɠ??l?ɃX?^?e?B?b?N???[?g??ݒ肷??
?F
?F?ȗ?
?F
IP static routing data:
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
2. 192.168.30.0 255.255.255.0 16 50
192.168.100.3
Add OK (y/n)? [y]:
*** Set IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]:
?F
?F?ȗ?
?F
Now you have set all configurations!
Do you display the configurations (y/n)? [y]: n
(Warning): Some configurations are not updated unless you reset
1. Save new parameter(s) and reset 3. Configurations set again
2. Save new parameter(s) only 4. Quit (no save and no reset)
Select the number. : 1?@?????Z?b?g???s??ꗧ???オ???A?ݒ肪?L???ł?
