 |
ISDN???M?米兰ac体育??ʒm?ɂ?鑊??F?ƒ??M????PPP?iCHAP?j?F???g?p??????ł??B
???????ł́AINFONET-RX20?ł米兰ac体育????????܂??B
|
INFONET-RX20 Remote Router B V01.03 1998.04.15
WAN topology ( 6) 1998/07/01 13:26:09 ( 0 00:10:17) Super Mode
1. configuration display
2. configuration set (normal)
3. configuration set (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
Select the number. : 2?@?@?@????{?ݒ???s???܂?
*** Selecting PORT way ***
1 HSD, HSD
* 2 HSD, ISDN
3 FR, ISDN
Select the number. [2]:
?F
?F?ȗ?
?F
*** Selecting WAN topology ***
<"L:" is load split, "B:" is backup, "L+B:" is load split and backup
1 HSD
2 HSD ( B:米兰ac体育1)
3 HSD (L+B:米兰ac体育1)
4 HSD (L+B:米兰ac体育1,2)
5 HSD ( B:米兰ac体育1,2)
* 6 米兰ac体育1
7 米兰ac体育1 (L :米兰ac体育2)
8 HSD, 米兰ac体育1
9 HSD, 米兰ac体育1 (L :米兰ac体育2)
10 米兰ac体育1, 米兰ac体育2
11 HSD ( B:米兰ac体育1),米兰ac体育2
12 HSD (L+B:米兰ac体育1),米兰ac体育2
13 HSD, 米兰ac体育1, 米兰ac体育2
Select the number. [6]: ?@?@?@??ISDN???(1B)???g?p???܂?
*** Set multi target configuration ***
<multi target configuration parameter(s)
multi target: not use
Do you change (y/n)? [n]:
*** Set ISDN remote address configuration ***
1. remote address data
2. remote address list
3. end
Select the number. [2]: 1
*** Set ISDN remote address data configuration ***receive address check mode : off
check skip length : 0
PPP authentication at incoming call : off
PPP authentication at outgoing call : off
PPP authentication accept : all
Do you change (y/n)? [n]: y
receive address check mode (1:on 2:off) [2]: 1
?????M?Ҕԍ??`?F?b?N???s??
check skip length [0]:
PPP authentication at incoming call (1:on 2:off) [2]: 1
?????M????PPP?F?????܂?
PPP authentication at outgoing call (1:on 2:off) [2]:
PPP authentication accept (1:chap 2:pap 3:all 4:off) [3]:
米兰ac体育(s) are set to the following values.receive address check mode : on
check skip length : 0
PPP authentication at incoming call : on
PPP authentication at outgoing call : off
PPP authentication accept : all
Set OK (y/n)? [y]:
*** Set ISDN remote address configuration ***
1. remote address data
2. remote address list
3. end
Select the number. [2]:
*** Set ISDN remote address list configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]: 3?@?@?@??target?̐ݒ?????܂?
<Add ISDN remote address list
target [t-0000]: chiba
address []: 043123yyyy
subaddress []:
authen at incoming (1:chap 2:pap 3:off) [3]: 1
?????M????chap?F?????܂?
authen at outgoing (1:chap 2:pap 3:off) [3]:
password: pass2
my hostname []: tokyo
my password: pass1
ISDN remote address list:
no target
---+-----------------------------------------------------------------
1. chiba
address : 043123yyyy
subaddress :
authen at incoming : chap
authen at outgoing : off
password : pass2
my host name : tokyo
my passwd : pass1
Add OK ((y/n)? [y]:
*** Set ISDN remote address list configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]:
*** Set ISDN remote address configuration ***
1. remote address data
2. remote address list
3. end
Select the number. [3]:
*** Main: Set 米兰ac体育1 configuration ***
<Main 米兰ac体育1 parameter(s)
local (ISDN address: subaddress: )
target index:
connection activate/deactivate: passive/passive
Do you change (y/n)? [n]: y
local ISDN address []: 031234xxxx?@?????ǂ̓d?b?ԍ???ݒ肵?܂?
subaddress []:
<Target index
1. chiba
Select the number of target index []: 1?@???ڑ??????I?????܂?
<Select connection activate/deactivate mode
activate deactivate | activate deactivate
------------------------------+----------------------------
1. time time |4. manual manual
2. traffic traffic |5. passive passive
3. time+traffic time+traffic |
Select the number. [5]: 2?@?@?@???ڑ??_?@??ݒ肵?܂?
Main 米兰ac体育1 parameter(s) are set to the following values.
<Main 米兰ac体育1 parameter(s)
local (ISDN address: 031234xxxx subaddress: )
target index: chiba
connection activate/deactivate: traffic/traffic
Set OK (y/n)? [y]:
*** Set basic configuration ***
<Basic configuration parameter(s)
IP routing : use
IP filtering : not use
IPX routing : not use
AppleTalk routing: not use
bridging : not use
SNMP : use
Do you change (y/n)? [n]:
*** Set IP router configuration ***
<IP router configuration parameter(s)
routing interface list
broadcast or
IP address subnetmask remote address interface type
-------+----------------+----------------+----------------+--------------
LAN 192.52.150.1 255.255.255.0 192.52.150.255 broadcast
米兰ac体育1 0.0.0.0 255.255.255.255 0.0.0.0 point to point
OSPF protocol: not use
Do you change (y/n)? [n]: y
LAN IP address [192.52.150.1]: 192.168.10.1
??LAN???̃A?h???X??ݒ肵?܂?
subnetmask [255.255.255.0]:
broadcast [192.168.10.255]:
米兰ac体育1 interface type (1:broadcast 2:point to point) [2]:
IP address []:
remote IP address [0.0.0.0]: 192.168.20.1
???????LAN???̃A?h???X??ݒ肵?܂?
remote subnetmask [255.255.255.0]:
OSPF protocol (1:use 2:not use) [2]:
IP router parameter(s) are set to the following values.
<IP router configuration parameter(s)
routing interface list
broadcast or
IP address subnetmask remote address interface type
-------+----------------+----------------+----------------+--------------
LAN 192.168.10.1 255.255.255.0 192.168.10.255 broadcast
米兰ac体育1 ---.---.---.--- 255.255.255.0 192.168.20.1 point to point
OSPF protocol: not use
Set OK (y/n)? [y]:
*** Set RIP(IP) motion configuration ***
<RIP(IP) motion parameter(s)
mode : supplier
default metric: 16
Do you change (y/n)? [n]:
*** Set RIP(IP) interface configuration ***
<RIP(IP) interface parameter(s)
send recv metric pre- broad- interval ageout time
control control ference cast (sec) (sec)
------+-------+-------+------+-------+------+----------+------+----------
LAN RIP1 RIP1,2 0 0 - - - -
米兰ac体育1 RIP1 RIP1,2 0 0 off 30 off 180
<RIP2 password
LAN : (not configured)
米兰ac体育1 : (not configured)
Do you change (y/n)? [n]: y
LAN RIP send control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [1]:
recv control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [3]:
password []:
metric [0]:
preference [0]:
米兰ac体育1 RIP send control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [1]: 4
??RIP???g?p???܂???
recv control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [3]: 4
??RIP???g?p???܂???
metric [0]:
preference [0]:
broadcast (1:on 2:off) [2]:
broadcast interval (sec) [30]:
RIP entry ageout (1:on 2:off) [2]:
ageout time (sec) [180]:
RIP(IP) interface parameter(s) are set to the following values.
<RIP(IP) interface parameter(s)
send recv metric pre- broad- interval ageout time
control control ference cast (sec) (sec)
------+-------+-------+------+-------+------+----------+------+----------
LAN RIP1 RIP1,2 0 0 - - - -
米兰ac体育1 off off 0 0 off 30 off 180
<RIP2 password
LAN : (not configured)
米兰ac体育1 :
Set OK (y/n)? [y]:
*** Set IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]: 4
<IP static routing table (max 32 entries)
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 0.0.0.0 ---.---.---.--- 16 50
米兰ac体育1
*** Set IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]: 2?@???K?v?łȂ??X?^?e?B?b?N???[?g???폜????
<Delete IP static routing data
Select the entry number. : 1
Selected IP static routing data:
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 0.0.0.0 ---.---.---.--- 16 50
米兰ac体育1
Delete OK (y/n)? [n]: y
*** Set IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]: 3?@???X?^?e?B?b?N???[?g??ݒ肷??
<Add IP static routing data
destination address [0.0.0.0]: 192.168.20.0
mask [255.255.255.0]:
gateway type(1:IP address 2:Interface 3:Target index) [1]:
gateway [0.0.0.0]: 192.168.20.1
metric [16]:
preference [50]:
IP static routing data:
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 192.168.20.0 255.255.255.0 16 50
192.168.20.1
Add OK (y/n)? [y]:
*** Set IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]:
?F
?F?ȗ?
?F
Now you have set all configurations!
Do you display the configurations (y/n)? [y]: n
(Warning): Some configurations are not updated unless you reset
1. Save new parameter(s) and reset 3. Configurations set again
2. Save new parameter(s) only 4. Quit (no save and no reset)
Select the number. : 1?@?????Z?b?g???s??ꗧ???オ???A?ݒ肪?L???ł?
INFONET-RX20 Remote Router B V01.03 1998.04.15
WAN topology ( 6) 1998/07/01 13:26:09 ( 0 00:10:17) Super Mode
1. configuration display
2. configuration set (normal)
3. configuration set (expert)
4. operation
5. information
6. shift to super mode
7. exit from remote console or current mode
Select the number. : 2?@?@?@????{?ݒ???s???܂?
*** Selecting PORT way ***
1 HSD, HSD
* 2 HSD, ISDN
3 FR, ISDN
Select the number. [2]:
?F
?F?ȗ?
?F
*** Selecting WAN topology ***
<"L:" is load split, "B:" is backup, "L+B:" is load split and backup
1 HSD
2 HSD ( B:米兰ac体育1)
3 HSD (L+B:米兰ac体育1)
4 HSD (L+B:米兰ac体育1,2)
5 HSD ( B:米兰ac体育1,2)
* 6 米兰ac体育1
7 米兰ac体育1 (L :米兰ac体育2)
8 HSD, 米兰ac体育1
9 HSD, 米兰ac体育1 (L :米兰ac体育2)
10 米兰ac体育1, 米兰ac体育2
11 HSD ( B:米兰ac体育1),米兰ac体育2
12 HSD (L+B:米兰ac体育1),米兰ac体育2
13 HSD, 米兰ac体育1, 米兰ac体育2
Select the number. [6]: ?@?@?@??ISDN???(1B)???g?p???܂?
*** Set multi target configuration ***
<multi target configuration parameter(s)
multi target: not use
Do you change (y/n)? [n]:
*** Set ISDN remote address configuration ***
1. remote address data
2. remote address list
3. end
Select the number. [2]: 1
*** Set ISDN remote address data configuration ***receive address check mode : off
check skip length : 0
PPP authentication at incoming call : off
PPP authentication at outgoing call : off
PPP authentication accept : all
Do you change (y/n)? [n]: y
receive address check mode (1:on 2:off) [2]: 1
?????M?Ҕԍ??`?F?b?N???s??
check skip length [0]:
PPP authentication at incoming call (1:on 2:off) [2]: 1
?????M????PPP?F?????܂?
PPP authentication at outgoing call (1:on 2:off) [2]:
PPP authentication accept (1:chap 2:pap 3:all 4:off) [3]:
米兰ac体育(s) are set to the following values.receive address check mode : on
check skip length : 0
PPP authentication at incoming call : on
PPP authentication at outgoing call : off
PPP authentication accept : all
Set OK (y/n)? [y]:
*** Set ISDN remote address configuration ***
1. remote address data
2. remote address list
3. end
Select the number. [2]:
*** Set ISDN remote address list configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]: 3?@?@?@??target?̐ݒ?????܂?
<Add ISDN remote address list
target [t-0000]: tokyo
address []: 031234xxxx
subaddress []:
authen at incoming (1:chap 2:pap 3:off) [3]: 1
?????M????chap?F?????܂?
authen at outgoing (1:chap 2:pap 3:off) [3]:
password: pass1
my hostname []:chiba
my password:pass2
ISDN remote address list:
no target
---+-----------------------------------------------------------------
1. tokyo
address : 031234xxxx
subaddress :
authen at incoming : chap
authen at outgoing : off
password : pass1
my host name : chiba
my passwd : pass2
Add OK ((y/n)? [y]:
*** Set ISDN remote address list configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]:
*** Set ISDN remote address configuration ***
1. remote address data
2. remote address list
3. end
Select the number. [3]:
*** Main: Set 米兰ac体育1 configuration ***
<Main 米兰ac体育1 parameter(s)
local (ISDN address: subaddress: )
target index:
connection activate/deactivate: passive/passive
Do you change (y/n)? [n]: y
local ISDN address []: 0431233yyyy?@?????ǂ̓d?b?ԍ???ݒ肵?܂?
subaddress []:
<Target index
1. tokyo
Select the number of target index []: 1?@???ڑ??????I?????܂?
<Select connection activate/deactivate mode
activate deactivate | activate deactivate
------------------------------+----------------------------
1. time time |4. manual manual
2. traffic traffic |5. passive passive
3. time+traffic time+traffic |
Select the number. [5]: 2?@?@?@???ڑ??_?@??ݒ肵?܂?
Main 米兰ac体育1 parameter(s) are set to the following values.
<Main 米兰ac体育1 parameter(s)
local (ISDN address: 031234xxxx subaddress: )
target index: tokyo
connection activate/deactivate: traffic/traffic
Set OK (y/n)? [y]:
*** Set basic configuration ***
<Basic configuration parameter(s)
IP routing : use
IP filtering : not use
IPX routing : not use
AppleTalk routing: not use
bridging : not use
SNMP : use
Do you change (y/n)? [n]:
*** Set IP router configuration ***
<IP router configuration parameter(s)
routing interface list
broadcast or
IP address subnetmask remote address interface type
-------+----------------+----------------+----------------+--------------
LAN 192.52.150.1 255.255.255.0 192.52.150.255 broadcast
米兰ac体育1 0.0.0.0 255.255.255.255 0.0.0.0 point to point
OSPF protocol: not use
Do you change (y/n)? [n]: y
LAN IP address [192.52.150.1]: 192.168.20.1
??LAN???̃A?h???X??ݒ肵?܂?
subnetmask [255.255.255.0]:
broadcast [192.168.20.255]:
米兰ac体育1 interface type (1:broadcast 2:point to point) [2]:
IP address []:
remote IP address [0.0.0.0]: 192.168.10.1
???????LAN???̃A?h???X??ݒ肵?܂?
remote subnetmask [255.255.255.0]:
OSPF protocol (1:use 2:not use) [2]:
IP router parameter(s) are set to the following values.
<IP router configuration parameter(s)
routing interface list
broadcast or
IP address subnetmask remote address interface type
-------+----------------+----------------+----------------+--------------
LAN 192.168.20.1 255.255.255.0 192.168.20.255 broadcast
米兰ac体育1 ---.---.---.--- 255.255.255.0 192.168.10.1 point to point
OSPF protocol: not use
Set OK (y/n)? [y]:
*** Set RIP(IP) motion configuration ***
<RIP(IP) motion parameter(s)
mode : supplier
default metric: 16
Do you change (y/n)? [n]:
*** Set RIP(IP) interface configuration ***
<RIP(IP) interface parameter(s)
send recv metric pre- broad- interval ageout time
control control ference cast (sec) (sec)
------+-------+-------+------+-------+------+----------+------+----------
LAN RIP1 RIP1,2 0 0 - - - -
米兰ac体育1 RIP1 RIP1,2 0 0 off 30 off 180
<RIP2 password
LAN : (not configured)
米兰ac体育1 : (not configured)
Do you change (y/n)? [n]: y
LAN RIP send control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [1]:
recv control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [3]:
password []:
metric [0]:
preference [0]:
米兰ac体育1 RIP send control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [1]: 4
??RIP???g?p???܂???
recv control (1:RIP1 2:RIP2 3:RIP1,2 4:off) [3]: 4
??RIP???g?p???܂???
metric [0]:
preference [0]:
broadcast (1:on 2:off) [2]:
broadcast interval (sec) [30]:
RIP entry ageout (1:on 2:off) [2]:
ageout time (sec) [180]:
RIP(IP) interface parameter(s) are set to the following values.
<RIP(IP) interface parameter(s)
send recv metric pre- broad- interval ageout time
control control ference cast (sec) (sec)
------+-------+-------+------+-------+------+----------+------+----------
LAN RIP1 RIP1,2 0 0 - - - -
米兰ac体育1 off off 0 0 off 30 off 180
<RIP2 password
LAN : (not configured)
米兰ac体育1 :
Set OK (y/n)? [y]:
*** Set IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]: 4
<IP static routing table (max 32 entries)
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 0.0.0.0 ---.---.---.--- 16 50
米兰ac体育1
*** Set IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]: 2?@???K?v?łȂ??X?^?e?B?b?N???[?g???폜????
<Delete IP static routing data
Select the entry number. : 1
Selected IP static routing data:
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 0.0.0.0 ---.---.---.--- 16 50
米兰ac体育1
Delete OK (y/n)? [n]: y
*** Set IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]: 3?@???X?^?e?B?b?N???[?g??ݒ肷??
<Add IP static routing data
destination address [0.0.0.0]: 192.168.10.0
mask [255.255.255.0]:
gateway type(1:IP address 2:Interface 3:Target index) [1]:
gateway [0.0.0.0]: 192.168.10.1
metric [16]:
preference [50]:
IP static routing data:
no dst address mask metric preference
gateway
---+---------------+---------------+------+----------
1. 192.168.10.0 255.255.255.0 16 50
192.168.10.1
Add OK (y/n)? [y]:
*** Set IP static routing configuration ***
1. change 2. delete 3. add 4. display 5. end
Select the number. [5]:
?F
?F?ȗ?
?F
Now you have set all configurations!
Do you display the configurations (y/n)? [y]: n
(Warning): Some configurations are not updated unless you reset
1. Save new parameter(s) and reset 3. Configurations set again
2. Save new parameter(s) only 4. Quit (no save and no reset)
Select the number. : 1?@?????Z?b?g???s??ꗧ???オ???A?ݒ肪?L???ł?
